New Buck Corporation 81 ユーザーズマニュアル

 
 

READ THIS FIRST 

 

 

  
THESE  UNITS  GENERATE A LOT OF HEAT, SO TREAT THEM  WITH  CARE.  HOT 
WHILE IN OPERATION.  KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.  
CONTACT MAY CAUSE SKIN BURNS.  READ ALL INSTRUCTIONS BEFORE 
INSTALLING AND USING THE APPLIANCE.   FAILURE TO FOLLOW  INSTRUC-
TIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCES. 
 

• 

The New Buck Corporation non-catalytic system has been tested  by Intertek Testing 
Services, Warnock Hersey  to ANSI/UL Standards 1482. 

• 

Install and operate your units according to instructions provided in this manual. Local 
building codes may apply; therefore, contact your local building inspector or fire marshal 
for necessary installation requirements and permits which may go beyond these instruc-
tions. 

 

• 

 

• 

Examine the masonry fireplace and chimney prior to installation of the fireplace 
accessory to determine that the construction meets the minimum fireplace construction 
requirements illustrated in the instructions, that it is free from cracks, loose mortar, 
creosote deposits and other blockage, or other signs of deterioration. 

 

 

 DO  NOT USE MORE THAN ONE STOVE TO A CHIMNEY.  DO NOT USE A  FLUE  
INTENDED FOR A GAS APPLIANCE. DO NOT CONNECT THIS UNIT TO A CHIMNEY 
FLUE SERVING ANOTHER APPLIANCE.  DO NOT CONNECT TO ANY AIR 
DISTRIBUTION DUCT OR SYSTEM. 
 

• 

A  factory-built pre-fabricated chimney may be used  for  your units when installed in 
compliance with the manufacturer's specification and uniform building code. 

 

3