New Buck Corporation 81 ユーザーズマニュアル

If  you decide to install your own stove, there are several  hand  tools  you  may need to do the 
job.  If you do not  already  have them, they are readily available at most hardware stores. 

 

Caulking gun 
Large adjustable wrench (may not be needed) 
Drop Cloths 
Vacuum cleaner or whisk broom 
Flashlight 
1  tube  of RTV silicone, Code 103 or 106,  or  high  temperature rubber cement rated between 
450

o

 F. - 600

o

 F. 

7/32" drill bit and drill 
Socket/Ratchet Set 
Insulation (provided in trim kit package) 
 

 

 
1.   Locate furniture and other materials away from the front  of  the fireplace to allow free 

access to the fireplace. 

 
2.  Cover the hearth and adjacent floor areas with the drop cloth  to protect from soiling or 

marring the surface. 

 
3.  Remove the existing fireplace damper plate. 
 
4.  Thoroughly clean the fireplace of ashes and soot. 
 
5.  If the fireplace has an ash dump or outside  air  provision, these  must  be  sealed off with 

metal  or  tightly  packed  non-combustible insulation to prevent this cold air from entering 
the fireplace chamber. 

 

CHECK  THE  CHIMNEY AND SMOKE CHAMBER FOR EX-
CESSIVE  BUILDUP  OF CREOSOTE  OR  SOOT. ALSO CHECK FOR OBSTR-
UCTIONS, SUCH  AS  BIRD'S NESTS.   IF  THE CHIMNEY IS EXCESSIVELY 
DIRTY CLEAN IT,  OR  HAVE SOMEONE  CLEAN IT PROFESSIONALLY BEFORE 
INSTALLING OR  USING  THE ROOM HEATER.  
 

7