Netgear WC7600 参照マニュアル
Configure Wireless and QoS Settings
165
ProSAFE Wireless Controller WC7600
6.
Configure the settings as described in the following table:
Setting
Description
Current Time
This field is a nonconfigurable field that displays the current time for the wireless
controller.
controller.
Schedule Radio On/Off
You can specify either when the radio is on by selecting the On radio button or
when it is off by selecting the Off radio button.
when it is off by selecting the Off radio button.
Schedule at
From the menus, specify the time (hours and minutes) when you want to turn the
radio either on or off.
radio either on or off.
Schedule On
Select the check boxes for each day of the week that you want to schedule the
radio to be either on or off.
radio to be either on or off.
Duration
From the menus, specify the duration (in hours and minutes) that the radio
should be either on or off.
should be either on or off.
7.
Click the Apply button.
Configure Wireless Settings
During initial setup, you entered your country and region in the General Settings screen (see
60). Based on your location and environment, the
wireless controller determined the best wireless settings for the discovered access points
and pushed these settings to your managed access points.
and pushed these settings to your managed access points.
IMPORTANT:
Unless your network and environment require that you use other
wireless settings, NETGEAR recommends that you leave the
wireless settings as they are.
wireless settings, NETGEAR recommends that you leave the
wireless settings as they are.
Typically, the default wireless settings do not need adjustment. Override the wireless settings
only if you have a specific need, such as setting that a phone vendor specifies that is different
from the default. You can configure wireless settings for the basic profile group and for
advanced profile groups (see
only if you have a specific need, such as setting that a phone vendor specifies that is different
from the default. You can configure wireless settings for the basic profile group and for
advanced profile groups (see
Configure Wireless Settings for the Basic Profile Group
Two requirements exist for you to be able to configure the wireless settings on the Basic
Wireless Settings screen:
Wireless Settings screen:
•
You must disable automatic channel allocation for the radio on the Channel Allocation
screen. For information about channel allocation, see
screen. For information about channel allocation, see
•
At least one access point must be assigned to the profile group for the radio for which you
want to configure the wireless settings.