Netgear WC7600 参照マニュアル
Maintain the Wireless Controller and Access Points
214
ProSAFE Wireless Controller WC7600
4.
Select Maintenance > Logs & Alerts > System Alerts.
The System Alerts screen displays:
5.
If the table contains many entries, navigate through the table by using the following buttons
and menu that display at the bottom of the table:
and menu that display at the bottom of the table:
•
To move to the next page, click the Next button.
•
To move to the previous page, click the Previous button.
•
To change the number of entries onscreen, from the Entry Per Page menu, select
20, or 40, or 60, and so on, or All.
20, or 40, or 60, and so on, or All.
6.
(Optional) Click one of the following buttons:
•
Refresh. Displays the latest alerts onscreen.
•
Clear All. Clears all alerts from the screen and from memory.
NETGEAR recommends that you save the alerts before you clear them.
•
Export. Saves the alerts to your computer. To save the alerts, follow the directions of
your browser.
your browser.
View Radio Frequency Events
The wireless controller generates alerts for radio frequency (RF) events such as the detection
of a coverage hole, a change of channel, or a managed access point going down.
of a coverage hole, a change of channel, or a managed access point going down.
To view RF events:
1.
Open a web browser. In the browser’s address field, type the http:// followed by the IP
address that you assigned to the wireless controller.
address that you assigned to the wireless controller.
By default, the IP address is 192.168.0.250. If you have not yet assigned another IP
address to the wireless controller, type http://192.168.0.250.
address to the wireless controller, type http://192.168.0.250.