Netgear WC7600 参照マニュアル
Manage Stacking and Redundancy
230
ProSAFE Wireless Controller WC7600
Configure a Stack
A stack can consist of up to three wireless controllers, one of which is the master controller
and two of which are slave controllers.
The following procedure assumes that you have already configured the system settings,
profiles, security settings, and wireless settings on the master controller, and that you have
already configured the system settings on the slave controller.
profiles, security settings, and wireless settings on the master controller, and that you have
already configured the system settings on the slave controller.
To create a stack by adding a slave controller to a wireless controller that functions as
the master controller:
the master controller:
1.
Open a web browser. In the browser’s address field, type the http:// followed by the IP
address that you assigned to the wireless controller.
address that you assigned to the wireless controller.
By default, the IP address is 192.168.0.250. If you have not yet assigned another IP
address to the wireless controller, type http://192.168.0.250.
address to the wireless controller, type http://192.168.0.250.
The wireless controller’s login screen displays.
2.
Enter your user name and password.
If you have not yet personalized your user name and password, enter admin for the user
name and password for the password, both in lowercase letters.
name and password for the password, both in lowercase letters.
3.
Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
screen.
screen.
4.
Select Stacking > Stacking.
The Stacking screen displays:
The Stacking table shows the master wireless controller with its IP addresses.
5.
Click the Add button.