Netgear WC7600 参照マニュアル
Manage Stacking and Redundancy
246
ProSAFE Wireless Controller WC7600
WARNING:
Enabling redundancy causes the wireless controller to reboot,
which might temporarily affect traffic on the managed access
points in the network.
which might temporarily affect traffic on the managed access
points in the network.
7.
Click the Apply button.
8.
Select Monitor > Network.
The Network monitoring screens displays.
9.
Click the Refresh button.
The Network monitoring screen displays redundancy information.
Change a Redundant Controller
To change the redundant controller after you have configured redundancy:
1.
Log in to the wireless controller.
52.
2.
Click the Replace button.
The Replacing Controller Information pop-up window displays.
Note:
The Replace button displays onscreen only after a redundancy
configuration has become active. The button is shown on
configuration has become active. The button is shown on
243.
VRRP ID [1-255]
For each primary controller in the redundancy group, enter a number from
1 through 255 as the VRRP ID. This enables each primary controller to have a
unique relationship with the redundant controller.
1 through 255 as the VRRP ID. This enables each primary controller to have a
unique relationship with the redundant controller.
Local IP
For each primary controller in the redundancy group, enter a local IP address. If
a failover occurs, this IP address remains assigned to the primary controller
and does not transfer to the redundant controller to let you identify the primary
controller before and after the failover.
a failover occurs, this IP address remains assigned to the primary controller
and does not transfer to the redundant controller to let you identify the primary
controller before and after the failover.
Setting
Description