Netgear WC7600 参照マニュアル

Click the Cancel button.

The Client Details screen closes, and the Clients screen displays again.

The Locate button is not functional in this release. The location 
functionality will be added in a later release.

You can monitor clients that the wireless controller detects and that are attached to known or 
rogue access points.



Open a web browser. In the browser’s address field, type the http:// followed by the IP 
address that you assigned to the wireless controller. 

By default, the IP address is 192.168.0.250. If you have not yet assigned another IP 
address to the wireless controller, type http://192.168.0.250.

The wireless controller’s login screen displays.

Enter your user name and password.

If you have not yet personalized your user name and password, enter admin for the user 
name and password for the password, both in lowercase letters.

Click the Login button.

Auth

The security mode that the wireless client is using to connect to the access 
point (Open, WEP, WPA, WPA2, or WPA/WPA2).

Client Type

The wireless mode that the wireless client is using to connect to the access 
point (802.11ng, 802.11bg, 802.11b, 802.11na, or 802.11a).

Cipher

The type of encryption that the wireless client is using (WEP, AES, TKIP, or 
TKIP

  AES).

AID

The association ID of the client.

RSSI

The received signal strength indicator (RSSI) of the wireless client.

Tx Power

The transmit power of the wireless client.

Tx Rate

The transmit rate in Mbps of the wireless client.

Tx Bytes

The number of bytes that the wireless client transmitted.

Rx Rate

The receive rate in Mbps of the wireless client.

Rx Bytes

The number of bytes that the wireless client received.

Tx Packets

The number of packets that the wireless client transmitted.

Rx Packets

The number of packets that the wireless client received.