Netgear WC7600 参照マニュアル

A management VLAN is used for all SNMP and HTTP traffic to and 
from the wireless controller and managed access points.

Clear the Untagged VLAN check box only if the hubs and switches in 
your network support the VLAN (802.1Q) standard. Likewise, change 
the untagged VLAN value only if the hubs and switches in your network 
support the VLAN (802.1Q) standard.

Click the Apply button.

If your network does not include a DHCP server, configure the wireless controller’s DHCP 
server.

Click the Apply button.

The connection to the wireless controller is terminated because you have changed its IP 
address.

Reconfigure your computer with an IP address and subnet mask that is in the same 
IP

  subnet as the new IP address of the wireless controller.

Log back in to the wireless controller using its new IP address.

.

After you have performed the initial configuration and changed the IP address to an address 

that is specific to your network (see the previous section, 

you are ready to configure the wireless controller for management of your wireless network.

This section is a roadmap only: It provides high-level configuration steps with references to 
the sections or chapters that provide detailed configuration steps.



Open a web browser. In the browser’s address field, type the http:// followed by the IP 
address that you assigned to the wireless controller. 

By default, the IP address is 192.168.0.250. If you have not yet assigned another IP 
address to the wireless controller, type http://192.168.0.250.

The wireless controller’s login screen displays.

Enter your user name and password.