Network Computing Devices Iridium/GPS Terminal D3000 ユーザーズマニュアル

Blue Sky Network 

 

August 07 

 

10 D3000 

100458

 

 
1-  Decide where in the vehicle or vessel (dashboard, ceiling etc) the D3000 will be installed. For 

instance, if the unit is going to be installed in the ceiling, the installer will need to fix the D3000 
ICB set upside down in relation to the standard dashboard mount (see below). Start by affixing 
the bracket (ICB) in the desired position using a suction mount, velcro tape or screws; 

 

  

 

Dashboard Mount-style 

 

Ceiling Mount-style 

 
 

2-  Align the bracket and terminal directions as shown below (cables always to the back side). 

Mount the round rubber mount on the right and left sides of the D3000 in a manner that allows 
the side screws to fit the top hole (out of the three, the one closest to edge) on the sides of the 
bracket (see below).  

 

 

 

a) Position the bracket 

 

 

b) Align the terminal’s back with ICB cables 

 

Rubber
Mount

Side
Screw

c) Insert side screws 

 

Attach the screws from the outside of each side of the bracket so that it goes through the bracket 
hole and screws into the rubber mount, which is attached to the D3000 Terminal. Screw it in 
firmly, but do not over-tighten.