Network Computing Devices Iridium/GPS Terminal D3000 ユーザーズマニュアル

Blue Sky Network 

 

August 07 

 

14 D3000 

100458

 

The D3000 voltage requirements are 9-18V - anything outside this limit may damage the unit. If your boat or 
vehicle’s power supply is not within this range, use a DC/DC converter to properly adjust it. 

 
a. Cigarette Lighter Adapter (“Quick Installation”) 
 
This is the quickest way of getting the D3000 up and running – just plug in the D3000 power interface to your 
vehicle’s cigarette lighter by using Blue Sky Network’s adapter (p/n 100297 – below). Please note that we 
strongly recommend that your vehicle’s cigarette lighter provides with a Switched power source (cigarette power 
is on when vehicle is on). This will prevent the D3000 to drain the main battery while vehicle is turned off. If a 
Constant power source is used (cigarette power always on), we recommend that the user disconnect the 
cigarette lighter adapter before leaving the vehicle. 
 

 

 
b. Fixed Installation (using factory receiver wires) 
 
This is the case for using the receiver wires from your boat or car panel (below) to power your D3000 unit.  

 

If a specific power harness is not available in your vehicle, you’ll need to identify each of the factory 
radio/receiver wires in order to connect them to the D3000 power connector. Please note that each vehicle 
receiver connector has a different set of wires with different colors and functions. For example: 

 

 VEHICLE 

Function: 

 Wire 

Color 

12V Switched 

Gray 

Yellow 

Blue/White 

Yellow/Black 

12V Constant 

Blue/Yellow 

Orange 

Blue/Red 

Green/Yellow 

Ground Brown 

Black 

Black 

Black 

 

This is just a reference. Please consult your vehicle’s installer guide to confirm the right wire for 12V Switched 
Power and Ground.