National Instruments NI-488.2 ユーザーズマニュアル

© National Instruments Corporation

5.

Rename the template as described in your application documentation.

6.

Click the OK button twice to save your changes and exit.

NI-488.2 DOS support is not available on Windows Vista or later operating systems.

To enable or disable NI-488.2 DOS support, complete the following steps:

1.

Start Measurement & Automation Explorer as described in the 

 section.

2.

Click on your GPIB interface and select Tools»NI-488.2»
DOS Support... from the Explorer menu.

3.

Enable or disable DOS support in the NI-488.2 Settings dialog box 
and click OK.

4.

If you are prompted to do so, restart your system.

To access additional help and resources for the NI-488.2 software and your 
GPIB hardware, refer to the following sections.

The NI-488.2 Help addresses questions you might have about NI-488.2 and 
includes a function reference and troubleshooting information. You can 
access the NI-488.2 online help as follows:

1.

Start Measurement & Automation Explorer as described in the 

 section.

2.

Select Help»Help Topics»NI-488.2.

You can access the National Instruments GPIB Web site as follows:

1.

Start Measurement & Automation Explorer as described in the 

 section.

2.

Select Help»National Instruments on the Web»GPIB Home Page.