National Instruments NI-488.2 ユーザーズマニュアル
Chapter 3
GPIB Explorer (Mac OS X and Linux)
© National Instruments Corporation
3-9
Device Configuration
Mac OS X
To run the NI Ethernet Device Configuration utility from the Finder,
double-click on Applications»National Instruments»NI-488.2»
EthernetConfig.
double-click on Applications»National Instruments»NI-488.2»
EthernetConfig.
Linux
To run the NI Ethernet Device Configuration utility, enter the following
command:
command:
/usr/local/natinst/ni4882/bin/ethernetconfig
For more information about the NI Ethernet Device Configuration utility,
refer to the GPIB-ENET/100 information in the GPIB Hardware Guide.
refer to the GPIB-ENET/100 information in the GPIB Hardware Guide.
Update GPIB-ENET/100 Firmware
Mac OS X
To run the Firmware Update utility, double-click on Applications»
National Instruments»NI-488.2»FirmwareUpdate.
National Instruments»NI-488.2»FirmwareUpdate.
Linux
To run the Firmware Update utility, enter the following command:
/usr/local/natinst/ni4882/bin/firmwareupdate
For more information about the Firmware Update utility, refer to the
GPIB-ENET/100 information in the GPIB Hardware Guide.
GPIB-ENET/100 information in the GPIB Hardware Guide.