National Instruments NI-488.2 ユーザーズマニュアル

items to include, 3-8
placing device offline before 

exiting, 3-9

applications, existing. See existing 

applications, running.

asynchronous event notification in Win32 

applications, 7-4 to 7-9

calling ibnotify function, 7-4 to 7-5
ibnotify programming example, 

7-5 to 7-9

ATN (attention) line (table), A-3
ATN status word condition

bit position, hex value, and type 

(table), 3-6

description, B-4

automatic serial polling. See serial polling.
auxiliary functions, Interactive Control utility, 

6-9 to 6-10

board calls. See NI-488.2 calls.
Borland C/C++ programming 

instructions, 3-12

buffer option function, Interactive Control 

utility, 6-10

bus management and device-level calls, 7-11

C language

Borland C/C++ programming 

instructions, 3-12

direct entry for application development, 

3-13 to 3-16

directly accessing gpib-32.dll 

exports, 3-15 to 3-16

gpib-32.dll exports, 3-13 to 3-14

Microsoft Visual C/C++ programming 

instructions, 3-12

cable length for high-speed data transfers, 

7-2 to 7-3

CIC. See Controller-in-Charge (CIC).
CIC Protocol, 7-11
CIC status word condition

bit position, hex value, and type 

(table), 3-6

description, B-4

CMPL status word condition

bit position, hex value, and type 

(table), 3-6

description, B-3

common questions. See troubleshooting and 

common questions.

communicating with instruments

multiple interfaces or multiple 

devices, 3-5

simple instrument control, 3-1 to 3-2
single GPIB device, 3-4 to 3-5
using Interactive Control utility, 3-7
using Measurement & Automation 

Explorer, 2-6 to 2-8

advanced communication, 2-7 to 2-8
basic communication, 2-6 to 2-7

using NI-488.2 Communicator, 3-1 to 3-2

communication errors, 4-5

repeat addressing, 4-5
termination method, 4-5

configuration, 1-1 to 1-3. See also Interactive 

Control utility.

controlling more than one interface, 1-2
linear and star system configuration 

(figure), 1-1

requirements, 1-2 to 1-3
system configuration effects on 

HS488, 7-3

configuration errors, 4-3
Configure (CFGn) message, 7-3
Configure Enable (CFE) message, 7-3
Controller-in-Charge (CIC)

active or inactive, A-1
making GPIB board CIC, 3-10, 7-11
System Controller as CIC, A-1