National Instruments NI-488.2 ユーザーズマニュアル

© National Instruments Corporation

The GPIB Configuration dialog box appears. Figure 2-7 shows the 
GPIB Configuration dialog box for an AT-GPIB/TNT (Plug and 
Play) interface in Windows NT.

Figure 2-7.  GPIB Configuration Utility in Windows NT

4.

Select your GPIB Board and click on the Configure button.

5.

(Optional) Change the settings for your interface.

For more information about changing the settings for your interface, click 
on the Help button.

To view information about your GPIB instruments, complete the following 
steps:

1.

If you have not already done so, scan for connected instruments as 
described in the 

 section earlier in this 

chapter.

2.

Select Start»Programs»National Instruments NI-488.2»Explore 
GPIB to start Measurement & Automation Explorer.

3.

Expand the Devices and Interfaces directory by clicking on the + next 
to the folder.

4.

Select your GPIB interface.

Measurement & Automation Explorer displays the connected 
instruments in the right window pane. Table 2-1 describes the