Namco Bandai Games 90500159 ユーザーズマニュアル
Page 31
4.
MOVING THE MACHINE
This equipment is fitted with castors to make it easier to move. Take care when
moving the equipment on an inclined floor.
moving the equipment on an inclined floor.
The overall height of this equipment is 1880mm. Take care of any overhead
obstructions. (e.g. Light Fittings, Electric Cables, etc.)
obstructions. (e.g. Light Fittings, Electric Cables, etc.)
5.
INSTALLATION
Notes on Installation
Never turn the power to the machine ON until installation has been completed.
In order to prevent possible electric shocks, be sure that the machine is
connected to the mains supply with a securely connected earthed plug.
connected to the mains supply with a securely connected earthed plug.
To ensure sufficient space for players, ensure that there is at least 500mm
seperation between other machines or walls.
seperation between other machines or walls.
In order to prevent damage to the machine due to mis-operation, ensure that the
voltage of the mains supply is 230volts AC.
voltage of the mains supply is 230volts AC.
NOTE • If the location of this machine has a polished floor, it is recommended that rubber
pads are fitted under the level adjusters to prevent the machine sliding on the
floor during operation.
floor during operation.
•
In order to gain access to the Power Supply and CPU assemblies, ensure that
the rear of the machine is seperated from a wall or other machines by at least
500mm.
the rear of the machine is seperated from a wall or other machines by at least
500mm.