Namco Bandai Games 90500159 ユーザーズマニュアル
Page 35
5-1
Adjusting the Level Adjusters
1. When the game is in it’s final position, lower the five (5) level adjusters, with a
spanner, so that all castors are raised from the floor by approximately 5mm.
Tighten the lock nuts with a spanner to ensure that the Level Adjusters do not
move.
spanner, so that all castors are raised from the floor by approximately 5mm.
Tighten the lock nuts with a spanner to ensure that the Level Adjusters do not
move.
Note: If the location of this game has a smooth or polished floor, it is recommended
that rubber pads are fitted under the Level Adjusters to prevent the game sliding
on the floor when in use.
on the floor when in use.
5-2
Initialization
It is important that the guns are initialized before this game is played for the first
time. Failure to initialize the guns may cause the game to function incorrectly.
time. Failure to initialize the guns may cause the game to function incorrectly.
Refer to the Test Mode “GUN INITIALIZATION”
section 6-2-11 page 48
Level adjuster
Castor
Approx. 5mm
Lock Nut