KYOCERA KR1 ユーザーズマニュアル
Troubleshooting
39
6
Troubleshooting
This section provides an overview of common issues, and possible solutions for the installation and operation of the
Kyocera KR1 Mobile Router.
Kyocera KR1 Mobile Router.
1. I am unable to access the Configuration Menu when I use my computer to configure the router.
Why?
Note:
It is recommended that you use an Ethernet connection to configure the Kyocera KR1 Mobile Router.
Ensure that the
Ethernet LED
on the Kyocera KR1 Mobile Router is
ON
.
If the
LED
is not
ON
, check to see if the cable for the Ethernet connection is securely inserted.
Note:
Ensure that the
IP Address
is in the same range and subnet as the Kyocera KR1 Mobile Router.
The IP Address of the Kyocera KR1 Mobile Router is 192.168.0.1. All the computers on the network
must have a unique IP Address within the same range (e.g., 192.168.0.x). Any computers that have
identical IP Addresses will not be visible on the network. All computers must also have the same subnet
mask (e.g., 255.255.255.0).
must have a unique IP Address within the same range (e.g., 192.168.0.x). Any computers that have
identical IP Addresses will not be visible on the network. All computers must also have the same subnet
mask (e.g., 255.255.255.0).
Do a
Ping test
to make sure that the Kyocera KR1 Mobile Router is responding.
Go to
Start > Run
. Type
cmd
. Press
Enter.
Type
ping 192.168.0.1.
A successful ping shows four replies.
Note:
If you have changed the
default
IP Address, ensure you ping the correct IP Address assigned to the
Kyocera KR1 Mobile Router.
Ensure that your Ethernet Adapter is working properly, and that all network drivers are installed properly.
Note:
The network adapter name displayed below is provided as an example. Network adapter names will vary
depending on your specific adapter. The installation steps listed below are applicable for all network
adapters.
depending on your specific adapter. The installation steps listed below are applicable for all network
adapters.