Korg Toneworks AX1500G オーナーマニュアル
5
1. Introduction
LCD and control panel
1
Name display
This shows the program name, effect
name, or parameter name, as appropri-
ate for each operation.
This shows the program name, effect
name, or parameter name, as appropri-
ate for each operation.
2
Edit icon
This will light if the selected program has been edited. It will blink if the program is
currently being edited.
This will light if the selected program has been edited. It will blink if the program is
currently being edited.
3
Phrase trainer icon
This will blink when you are in Phrase Trainer mode.
This will blink when you are in Phrase Trainer mode.
4
Metronome icon
This will light when the metronome is on. It will blink while the metronome tempo or
level is being adjusted.
This will light when the metronome is on. It will blink while the metronome tempo or
level is being adjusted.
5
MASTER/VALUE display
This shows the master level and parameter values. When the parameter value matches
the value that is written in the program, the ORIG (original icon) will light.
This shows the master level and parameter values. When the parameter value matches
the value that is written in the program, the ORIG (original icon) will light.
6
NR-PRG LEVEL switch
Use this switch to adjust the amount of noise reduction or the level of each program.
Use this switch to adjust the amount of noise reduction or the level of each program.
7
RENAME switch
Use this switch to change the name of a program.
Use this switch to change the name of a program.
8
Metronome LED
This LED will blink in time with the metronome tempo.
This LED will blink in time with the metronome tempo.
9
WRITE switch
Use this switch to save an edited program.
Use this switch to save an edited program.
0
EXIT switch
From any function, you can press this to return to Play mode.
From any function, you can press this to return to Play mode.
A
Cursor switches ( , )
Use these switches to select the parameter that you wish to edit, or when modifying the
name of a program.
Use these switches to select the parameter that you wish to edit, or when modifying the
name of a program.
B
MASTER/VALUE switches (▲, ▼)
Use these switches to change the master level or the value of a parameter.
Use these switches to change the master level or the value of a parameter.
C
Pedal LED
This indicates the on/off status and type of the pedal effect, and the recording status
when the Sample & Play function is used.
This indicates the on/off status and type of the pedal effect, and the recording status
when the Sample & Play function is used.
D
Bank number display
This shows the bank number of the selected program. When a user program is selected, a
decimal point “.” located at the lower right of the bank number will light.
This shows the bank number of the selected program. When a user program is selected, a
decimal point “.” located at the lower right of the bank number will light.