Kramer Electronics Home Theater Screen VP-747 ユーザーズマニュアル

ページ / 59
KRAMER:  SIMPLE CREATIVE TECHNOLOGY 
Connecting the VP-747 
 
12 
6  Connecting the VP-747  
The VP-747 is a universal presentation matrix switcher / scaler that lets you 
choose what sources to connect to the inputs. For example, you can connect 
just five sources: an RGBHV source, two DVI / HDMI sources, an HDTV 
source and an RGBS source (as the example in 
 shows).  
To connect
 the VP-747 as illustrated in the example in 
, do the 
following:  
1.  Connect the following video sources: 
  An HDMI source to the INPUT DVI / HDMI 1 connector 
  An HDMI source to the INPUT DVI / HDMI 2 connector 
  An HDTV satellite receiver source to the R/PR, G/Y/CV, and 
B/PB/C BNC INPUT 6 connectors (PR/Y/PB) 
  An RGBHV computer graphics source to the R/PR, G/Y/CV, 
B/PB/C, HS/CS and V BNC INPUT 8 connectors (R, G, B, H, V) 
2.  Connect the PROGRAM OUT: 
  DVI / HDMI connector to the plasma display 
  VGA 15-pin HD connector to the analog display 
  R/PR, G/Y, B/PB, (PR, Y, PB) BNC OUTPUT connectors to the 
YUV acceptor, for example, a projector (PR,Y, PB) 
3.  Connect the PREVIEW OUT R/PR, G/Y, B/PB, HS and VS BNC 
OUTPUT connectors to the display (R, G, B, H, V) 
4.  Connect the power cord
5.  If required, connect: 
  A PC via RS-232, see 
  The Kramer VP-727A Audio Switcher via the To AUDIO UNIT 
RS-485 port
Section  7.1
, see 
  The Kramer VP-727T Presentation Switcher Control Panel via the 
TO CONTROLLER mini XLR port
Section  7.2
  The ETHERNET port
, see 
 
Section  7.4
                                                        
1 Switch OFF the power on each device before connecting it to your VP-747. After connecting your VP-747, switch on its 
power and then switch on the power on each device 
2 We recommend that you use only the power cord that is supplied with this machine 
)