Kolpak Recording Equipment DA-98 ユーザーズマニュアル
Section 8 – Advanced operations
06/97 – 1.00 – 8-9
However, each track can be patched internally to
take its input from any one of the eight inputs or
from any one of the other tape tracks. Note that in
the example below, it is possible for a track to act
as an input source to another track at the same
time that it is recording from an external input.
This allows great flexibility in dubbing situations.
take its input from any one of the eight inputs or
from any one of the other tape tracks. Note that in
the example below, it is possible for a track to act
as an input source to another track at the same
time that it is recording from an external input.
This allows great flexibility in dubbing situations.
Naturally since the DA-98 tracks are digital, there
is no loss of quality incurred when tracks are
transferred.
is no loss of quality incurred when tracks are
transferred.
8.11.1 Track Copy (channel-to-track
routing)
1) Select menu group 0, move the cursor to
Trk
Copy
and press
ENTER
:
2) Use the
LEFT
and
RIGHT
keys to move the
cursor to the
off
on the bottom line of the
display and change it to
on
.
The
TRACK COPY
indicator will light.
3) Use the
LEFT
and
RIGHT
keys to move the
cursor to the track you want to route.
You can also use the function keys as number keys
for direct selection of the track (see 5.2.2, “Using
the function keys as number keys”).
for direct selection of the track (see 5.2.2, “Using
the function keys as number keys”).
4) Use the
UP
and
DOWN
keys to change the track
input between inputs 1 through 8 and tracks 1
through 8.
through 8.
5) To re-route a track to its input, press and hold
down the
UP
key and then press the
DOWN
key.
8.12 REC MUTE (recording
silence)
There may be times when you wish to prevent any
signal from reaching an armed track (in other
words, when you record, you are recording silence
onto the track.
signal from reaching an armed track (in other
words, when you record, you are recording silence
onto the track.
1) Enter menu group 1, move the cursor to
Rec
mute
and press
ENTER
:
In the screen above, tracks 7 and 8 are muted (no
input signal is routed to them).
input signal is routed to them).
2) Use the
LEFT
and
RIGHT
cursor keys to
navigate between tracks. Use the
UP
and
DOWN
keys to switch the track muting of individual
tracks on or off.
tracks on or off.
Pressing and holding the
UP
key and then pressing
the
DOWN
key will reset the REC MUTE settings
of all tracks.
8.13 Dither
Dither is the technique of adding a known noise to
low-level signals, especially when converting
from a high number of bits (for instance 24 or 20
low-level signals, especially when converting
from a high number of bits (for instance 24 or 20
NOTE
It is not possible to combine tracks (as in conventional
“ping-pong”) using the Track Copy function. Combin-
ing of tracks must be carried out through an external
mixing console. You can bounce a track to itself, but it is
not a particularly meaningful process!
“ping-pong”) using the Track Copy function. Combin-
ing of tracks must be carried out through an external
mixing console. You can bounce a track to itself, but it is
not a particularly meaningful process!
T r a c k
C o p y
I n p u t
1 2 3 4 5 6 7 8
( A n a )
T a p e
T r a c k
1 2 3 4 5 6 7 8
o f f
3 4 5 6 7 8
2
1
1 2 3 4 5 6 7 8
3 4 5 6 7 8
2
1
1 2 3 4 5 6 7 8
Track
Copy
Input
1234
(Dig)
Tape
1234
Track
12345678
on
Inputs
Tape
tracks
tracks
NOTE
If you change from analog to digital input (see 8.10.1,
“Changing between digital and analog inputs”) or vice
versa, the display will change between
“Changing between digital and analog inputs”) or vice
versa, the display will change between
(Ana)
and
(Dig)
as appropriate.
R e c
M u t e
O n
» »
O f f
» » » » » »
t r k
1
2
3
4
5
6
7
8