Kenwood TM-271 ユーザーズマニュアル
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
10
3
In MR Mode, press [F] then press [VFO] to transfer
the contents of the selected Memory Channel to the
VFO {page 33}.
the contents of the selected Memory Channel to the
VFO {page 33}.
t
t
t
t
t MR key
Press to enter Memory Recall Mode {page 30}. In
this mode, you can change memory channels using
the Tuning control or Mic [UP]/[DWN]. Press and
hold for 1 second while in Memory Recall Mode to
begin Memory Scan {page 42}.
this mode, you can change memory channels using
the Tuning control or Mic [UP]/[DWN]. Press and
hold for 1 second while in Memory Recall Mode to
begin Memory Scan {page 42}.
Press [F], use the Tuning control to select the
desired channel, then press [MR] to reprogram the
Call Channel or a Memory Channel {page 29}.
desired channel, then press [MR] to reprogram the
Call Channel or a Memory Channel {page 29}.
y
y
y
y
y REV key
Press to switch the transmit frequency and receive
frequency when operating with an offset {page 23} or
an odd-split Memory Channel {page 28}.
frequency when operating with an offset {page 23} or
an odd-split Memory Channel {page 28}.
Press [F] then press [REV] and rotate the Tuning
control to increase or decrease the squelch level
{page 14}.
control to increase or decrease the squelch level
{page 14}.
u
u
u
u
u
/F key
Press and hold for 1 second to lock the transceiver
keys {page 58}.
keys {page 58}.
Press momentarily to access the second functions of
the transceiver keys.
the transceiver keys.
DISPLAY
i
u
y
t
r
q w e
!1
!2
!4 !3
o
!5
!6
!7
!0
q
Appears when the CTCSS function is activated {page 46}.
Appears when the CTCSS function is activated {page 46}.
w
Appears when the Tone function is activated {page 24}.
Appears when the Tone function is activated {page 24}.
e
Appears when the DCS function is activated {page 48}.
Appears when the DCS function is activated {page 48}.
r
Appears when the repeater shift function is activated
{pages 23, 30}. (“
Appears when the repeater shift function is activated
{pages 23, 30}. (“
” is not used on this transceiver.)
t
Appears when the Reverse function is activated {page 26}.
Appears when the Reverse function is activated {page 26}.