Juniper Networks fi-6000NS ユーザーズマニュアル
172
3. Select the color mode.
⇒
Selecting a brightness level returns you to the "Scan Settings" screen.
The selected mode is displayed to the right of the [Color Mode] button.
The selected mode is displayed to the right of the [Color Mode] button.
Color Mode
Description
Auto
Automatically decides whether to scan in color or in black and white
based on document contents.
based on document contents.
RGB Color
Scans documents in color.
Black & White
Scans documents in black and white.
HINT
•
Usually, the color mode should be set as [Auto].
If this setting is specified, there is no need to change the color mode each
time you scan a document.
Note that black and white mode may be automatically selected for the
following kinds of documents:
If this setting is specified, there is no need to change the color mode each
time you scan a document.
Note that black and white mode may be automatically selected for the
following kinds of documents:
•
Faintly toned nonwhite papers
•
Documents with only a minor amount of color
•
Documents printed in gray or other close-to-black colors.
To ensure such documents are scanned in color mode, press the [RGB
Color] button on the "Color Mode" screen.
Color] button on the "Color Mode" screen.
•
If the [Auto] paper size is selected, the [Custom] paper size Long Page
mode cannot be used.
mode cannot be used.
•
If the [Black & White] color mode is selected, the following options cannot
be used:
be used:
•
[JPEG] File Format
•
Compression