Juniper Networks fi-6000NS ユーザーズマニュアル
70
4. For the SMTP server, select whether to set a server name or IP address.
Both the [Server Name] and [IP Address] buttons cannot be selected at the same time.
5. Enter the SMTP server or IP address (selected in Step 4).
• If the [Server Name] button is selected:
Enter a FQDN or server name in the input field. This may be up to 255 characters long. If
the SMTP server setting is not required, leave the field blank.
the SMTP server setting is not required, leave the field blank.
• If the [IP Address] button is selected:
Enter a numerical IP address.
If the SMTP server setting is not required, enter "0.0.0.0".
If the SMTP server setting is not required, enter "0.0.0.0".
6. Set the "Maximum Attachment Size" for e-mails. This may be between one and ten
MB.
The default size is "1MB".
7. Press the [OK] button.
⇒
The SMTP server is set.