jWIN JT-P551 ユーザーズマニュアル

www.jWIN.com 

1. EMERGENCY 

MESSAGE 

It is important you record the personalized message with all the important 
information as below (part B). 
 

A.  This unit includes a back-up pre-recorded message. “THIS IS AN 

EMERGENCY CALL, TO ACCEPT THIS CALL PRESS ZERO.” 

 

B.  Your own message must be recorded to properly use the Emergency Help 

System (max. recording time is 20 seconds). The message should always 
end with “please immediately hang up if you cannot get me help now. To 
accept this call press zero”. 

Example: There is a medical emergency at the home of John Smith at 123 
Main Street, Apt. 4D, please come at once. Please immediately hang up if you 
cannot get me help now. To accept this call press zero. 

 
2.  RECORDING AN EMERGENCY MESSAGE 

A. 

Press and release the [MENU] button until the “RECORD MESSAGE” is 
shown in the LCD display. 

 

B. 

Press and hold the [OK/DIAL]. Start your message directly after you hear 
the “BEEP” tone and “VOICE” icon is flashing. While recording, keep at a 
distance of 15cm from the telephone so that you speak easily into the 
microphone on the upper side. 

 

C. 

Release [OK/DIAL] after you have finished your emergency message. The 
message will now be played back automatically. 

 
3.  CHECKING THE EMERGENCY MESSAGE 

You can check the emergency message at any time. 
A.  Press and release the [MENU] button until the words “CHECK MESSAGE” 

appear on the LCD screen. 

 
B. The 

press 

[OK/DIAL] to play back the message. 

 
4.  DELETING EMERGENCY MESSAGE  (REVERT TO PRE-RECORDED 

MESSAGE) 
If you have recorded your own message, you can delete this and by doing so 
revert to the pre-recording message. Note: As stated above, it is important to 
record a personalized message. 

A. 

Press and release the [MENU] button until the words “CHECK MESSAGE” 
appear on the LCD screen.