JVC KW-XC828 ユーザーズマニュアル
8
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
Auto search
1
Select the band (FM1, FM2, FM3 or
AM).
AM).
Note:
This receiver has three FM bands (FM1, FM2, and
FM3). You can use any one of them to listen to an FM
broadcast.
This receiver has three FM bands (FM1, FM2, and
FM3). You can use any one of them to listen to an FM
broadcast.
2
Start searching for a station.
To stop searching before a station is received,
press the same button you have pressed for
searching.
press the same button you have pressed for
searching.
Searching for a station manually:
Manual search
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
AM).
2
Press and hold
¢
or
4
until “M (manual)” starts flashing on
the display.
the display.
3
Tune in to a station you want while
“M” is flashing.
“M” is flashing.
• If you release your finger from the button, the
manual mode will automatically turn off after 5
seconds.
seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM and
9 kHz for AM) until you release the button.
9 kHz for AM) until you release the button.
EX
DIRECTORY
Selected band appears.
When a station is received, searching
stops.
stops.
FM1
FM2
FM3
AM
To search stations of
higher frequencies
higher frequencies
To search stations of
lower frequencies
lower frequencies
Press
¢
to tune in
to stations of higher
frequencies.
frequencies.
Press
4
to tune in
to stations of lower
frequencies.
frequencies.
FM1
FM2
FM3
AM
EN08-11KW-XC828[U]
02.1.30, 5:33 PM
8