John Deere OMGX10742 J9 ユーザーズマニュアル
Safety - 1
SAFETY
Safety
Understanding The Machine Safety Labels
The machine safety labels shown in this section are placed
in important areas on your machine to draw attention to
potential safety hazards.
in important areas on your machine to draw attention to
potential safety hazards.
On your machine safety labels, the words DANGER,
WARNING, and CAUTION are used with this safety-alert
symbol, (
WARNING, and CAUTION are used with this safety-alert
symbol, (
c
). DANGER identifies the most serious
hazards.
The operator’s manual also explains any potential safety
hazards whenever necessary in special safety messages
that are identified with the word, CAUTION, and the safety-
alert symbol, (
hazards whenever necessary in special safety messages
that are identified with the word, CAUTION, and the safety-
alert symbol, (
c
).
DANGER
Picture Note: One decal located on chute spout
and two on top surface of snowblower housing.
and two on top surface of snowblower housing.
To avoid injury
•
Shut off engine and wait for all movement to stop before
unclogging snow deflector.
•
Keep hands, feet and clothing away from rotating auger.
WARNING
Picture Note: Decal located on pulley cover of
snowblower housing.
snowblower housing.
•
Stop machine to adjust and oil.
•
Keep all shields in place.
•
If unit becomes clogged, shut off engine before
cleaning.
•
Keep hands, feet and clothing away from power-driven
parts.
•
Make sure your tractor is equipped with rear weights.
Operate Safely
•
Read the Tractor and Snowblower Operator’s Manual
carefully. Be thoroughly familiar with the controls and the
proper use of the equipment. Know how to stop the tractor
and disengage the controls quickly.
proper use of the equipment. Know how to stop the tractor
and disengage the controls quickly.
•
Check vehicle brake action before you operate. Adjust or
service brakes as necessary.
•
Inspect machine before you operate. Be sure hardware
is tight. Repair or replace damaged badly worn, or missing
parts. Be sure guards and shields are in good condition
and fastened in place. Make any necessary adjustments
parts. Be sure guards and shields are in good condition
and fastened in place. Make any necessary adjustments