Jensen Tools VM9511TS ユーザーズマニュアル

17

VM9511TS

To return to the System Setup menu, move to “BACK”, then 
press the >/|| button (18) on the remote control.

The ASP Config Menu allows you to make fine audio 
adjustments.

To access the “ASP CONFIG” Menu from the “SYSTEM 
SETUP” menu, press the direction buttons on the joystick 
(16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to 
highlight “ASP CONFIG” in green. Press the >/|| button (18) 
on the remote control to enter the “ASP CONFIG” menu. A 
menu appears with the option for the first item, “Bass Center 
Freq”, highlighted in light blue.

Adjusting a Feature
1.

Enter the option field for the feature you want to adjust 
by pressing the >/|| button (18) on the remote or by 
pressing the ENTER (joystick) button (20) on the unit. A 
submenu appears in a second row with the selected 
option highlighted in light blue.

2.

Select a new value by pressing the >> or 

 buttons (14, 

22) on the remote control or the /\ or V buttons (18, 19) 
on the joystick.

3.

Confirm your selection by pressing the 

, |<<, or >>|

buttons (22, 17, 19) on the remote control, or the < or >

button (16, 17) on the joystick. The new value is 
highlighted in light blue and setup is complete. 

After entering calibration mode, a crosshair   appears in a 
corner quadrant of the screen. To begin calibration, press 
and hold the crosshair for one second until it moves to the 
next quadrant. Continue for each quadrant until the 
calibration is completed.

To exit setup mode and resume normal playback, press the 
SYS SETUP button (31) on the remote control or the DISP
button (5) on the front panel.

Bass Center 
Freq

60Hz

According to the audio source, select 
the Bass Center Frequency to 
achieve the best Bass effect.

80Hz

100Hz

130Hz

150Hz

200Hz

Treble Center 
Freq

10KHz

According to the audio source, select 
the Treble Center Frequency to 
achieve the best Treble effect.

12.5KHz

15KHz

17KHz

Sub.W Filter

80Hz

Selecting a crossover frequency sets 
a cut-off frequency of the subwoofer's 
LPF (low-pass filter) and the 
“SMALL” speakers' HPF (high-pass 
filter). The Crossover frequency set-
ting has no effect if the subwoofer is 
set to “OFF” and any other speaker is 
set to “LARGE”.

120Hz

160Hz

Sub.W Phase

0D

Subwoofer output IN phase

180D

Subwoofer output OUT OF phase

Bass Q-Factor

1.0

When the Bass Center Frequency is 
selected, adjusting the Bass Q-Fac-
tor alters the sharpness of the Bass 
output.

1.25

1.5

2.0

BACK

Return to previous menu.