Jensen JHT350 ユーザーズマニュアル
12
17
AM
FM
FM
Outdoor AM antenna
Coaxial cable(75 ohm)
Coaxial cable (75 ohm)
Outdoor FM antenna
Radio signals may be difficult to receive in
some buildings and under certain conditions.
some buildings and under certain conditions.
The provided antennas will help in their reception.
They are intended for indoor use only.
AM Loop Antenna
The placement of the AM loop antenna should
be in a direction that provides the clearest
reception. Keep as far as possible from DVD
receiver, TV set, and speaker and power cords.
If reception remains poor, an outdoor antenna
may be necessary.
reception. Keep as far as possible from DVD
receiver, TV set, and speaker and power cords.
If reception remains poor, an outdoor antenna
may be necessary.
To connect the AM loop antenna:
1.Hold down handle
2.Insert wire end into hole
3.Release handle
Position for best reception
FM Indoor Antenna
The FM antenna should be fully extended
and in a direction that provides the clearest
signal. Secure the antenna ends in a location
where distortion is a minimum. If reception
remains poor, an outdoor antenna may be
necessary.
The FM antenna should be fully extended
and in a direction that provides the clearest
signal. Secure the antenna ends in a location
where distortion is a minimum. If reception
remains poor, an outdoor antenna may be
necessary.
To connect the FM antenna:
1.
1.
Open cable terminal by pressing back on tab
2.Insert wire end
3.Release tab; make sure wire is in terminal
securely
3.Release tab; make sure wire is in terminal
securely
2
3
1
CONNECTING
ANTENNA
N/P
This DVD receiver supports video output of
various systems, including auto, NTSC,
This DVD receiver supports video output of
various systems, including auto, NTSC,
and PAL.
The picture will blink and become colo
rless
when the wrong system is selected. If this
occurs, press the N/P key on the remote control,
then select the correct system (NTSC for North
America, PAL for Europe). For more information
on output format, refer to the TV set's manu-
facturer's instructions.
occurs, press the N/P key on the remote control,
then select the correct system (NTSC for North
America, PAL for Europe). For more information
on output format, refer to the TV set's manu-
facturer's instructions.
Subtitles
The unit has the capability to display subtitles
The unit has the capability to display subtitles
in any of 32 different languages.
1. Press the SUBTITLE key. The subtitle
menu will appear. Select the desired
language by pressing the SUBTITLE key.
1. Press the SUBTITLE key. The subtitle
menu will appear. Select the desired
language by pressing the SUBTITLE key.
2. To remove the subtitles from view, press
the SUBTITLE key until they disappear.
the SUBTITLE key until they disappear.
Note: The disc being played must be multi-
subtitle encoded.
subtitle encoded.
SUBTITLE OFF
SUBTITLE 02/08 ENGLISH
SUBTITLE
Camera Angle
The ability to change the camera angle allows
The ability to change the camera angle allows
the
viewer to play director and watch a movie from
different perspectives.
1. Press the ANGLE key on the remote control.
With each press, the angle changes.
2. The key may be pressed only when the
flashing angle icon appears in the unit's
display panel.
different perspectives.
1. Press the ANGLE key on the remote control.
With each press, the angle changes.
2. The key may be pressed only when the
flashing angle icon appears in the unit's
display panel.
Note: Camera angle
s may be changed only on
discs with multi-angle capability encoded
into them.
into them.
Language
The unit has the capability to show movies in
The unit has the capability to show movies in
one of eight languages.
1. Press the LANGUAGE key. The language
menu will appear. Select desired language
by pressing the LANGUAGE key.
1. Press the LANGUAGE key. The language
menu will appear. Select desired language
by pressing the LANGUAGE key.
Note: The disc being played must be multi-lan-
guage encoded.
guage encoded.
1/4
ANGLE
AUDIO 1/8 AC-3 2CH ENGLISH
LANGUAGE
LOCATING A TITLE
DVD discs are normally divided into titles,
which are then sub-divided into chapters. A
specific title can be easily found with this unit.
Specific titles can be found using either the title
menu function, if the DVD disc contains a title
menu, or through its unique title number.
DVD discs are normally divided into titles,
which are then sub-divided into chapters. A
specific title can be easily found with this unit.
Specific titles can be found using either the title
menu function, if the DVD disc contains a title
menu, or through its unique title number.
Title Menu Function
1. Press the TITLE key. The title menu will
appear on the TV screen.
2. Press the appropriate scroll key to select
desired title. A title may also be located
by pressing its assigned number with the
number buttons.
3. Press the ENTER ke
1. Press the TITLE key. The title menu will
appear on the TV screen.
2. Press the appropriate scroll key to select
desired title. A title may also be located
by pressing its assigned number with the
number buttons.
3. Press the ENTER ke
y to start playback
from chapter 1 of the selected title.
Note:
Some discs do not respond to this function. If
different instructions appear on the TV screen,
follow those instructions.The Instructions given
here describe the basic procedure. Procedures
may vary depending on the content of the DVD
disc. When playing a VCD2.0 disc,
Some discs do not respond to this function. If
different instructions appear on the TV screen,
follow those instructions.The Instructions given
here describe the basic procedure. Procedures
may vary depending on the content of the DVD
disc. When playing a VCD2.0 disc,
the TITLE
key can be used to return to the menu.
FUNCTIONS
Pro Logic selector
When play
When play
ing a DVD/VCD disc, first press STOP,
th
en pressthe Pro Logic key to select Pro Logic
ON or OFF channel output.
When play
When play
ing CDs and in tuner mode, press the
Pro Logic key to select stereo or 5.1 channel
output.
output.