Sharp QSINUFO ユーザーズマニュアル

                                                                                                                                                  Operating Instructions 

When the Top Page does 
not appear. 

• Enter the correct IP address set up to the Network 

Camera. 

•  IP address of the PC and the Network Camera must be in 

the same class of the private IP address on the LAN. 

• Confirm if the Ethernet, the hub and the LAN card 

indicators are on. If any indicator is off, check the network 
connections. 

• The network congestion prevents the Top Page from 

appearing quickly. Please wait for a while. 

• The proxy server may prevent you from connecting 

directly to the Network Camera, please set up not to use 
the proxy server.   

When forgetting the 
password to access the 
Setup Page. 

1.  Reset the Network Camera by pressing the CLEAR 

SETTING button. 

2.  Reconfigure the Network Camera. 

 

 

When using this unit, basic safety precautions should always be followed to reduce the risk of fire, 

electric shock, or personal injury. 

a)  Read and understand all instructions. 

b)  Unplug this unit from AC outlets before cleaning. Do not use liquid or aerosol cleaners. 

Use a damp cloth for cleaning. 

c)  Do not use this unit near water, for example, near a bathtub, washbowl, kitchen sink, or 

the like. 

d)  Place this unit securely. Serious damage and/or injury may result if the unit falls. 

e)  Use proper power source. If you are not sure of the type of power supplied to your home, 

consult your dealer or local power company. 

f)  Do not place objects on the power cord. Install the unit where no one can step or trip on 

the cord. 

g)  To reduce the risk of electric shock, do not disassemble this product, but take it to a 

qualified serviceman when some service or repair work is required. Opening or removing 

covers may expose you to dangerous voltage or other risks. Incorrect reassembly can 

cause electric shock when the appliance is subsequently used. 

h)  Unplug this unit from the wall outlet and refer servicing to an authorized serviette when 

the following conditions occur: 

1)  When the power supply cord or plug is damaged or frayed. 
2)  If liquid has been spilled into the unit. 

 

40