Jensen Voyager CSW5007Q ユーザーズマニュアル

Remote Control

- Press POWER button to turn 
   the control box on or off.

* When the trigger signal is activated, 
   the selected source's image will be 
   displayed on the monitor screen 
   automatically. (Please refer to 
   TRIGGER MODE in SETUP MENU 
   for further information)

- Press  - / + button to adjust BRIGHT or 
  CONTRAST level.
- Press  - / + button to select the content 
  of the selected line in each sub menu.

- Press UP / DOWN button to adjust 
  TILT (PAN) camera position upward or 
  downward.
  (Available only when TILT (PAN) camera 

    Is connected to CA1, CA2, or CA3 input)

- Press UP/ DOWN button to move the 
  cursor  up or down in SETUP MENU 
  and each sub menu.

- Press CH.SELE button to select the display image. 
  Sequential press shows the image of each camera in turn below.

( CAM1     CAM2     CAM3     CAM4     AUX     SPLIT2     SPLIT3     SPLIT4 )

* OSD indicates which image is displayed on the screen.

- Press CH.SELE button to select the items, in which the cursor is in menu.
- Press CH.SELE button to start or stop scanning each display mode sequentially. 

Available only when AUTO SCAN in menu is ON. 

- Press CA1, CA2 or CA3 button to select each camera.
- Press CA4 / AV button to select CA4 and press again to select any AV device 
  connected.

8