Jameco Electronics Rabbit 2000 ユーザーズマニュアル

reset pin, and to a programmable output pin that is used to signal the PC that attention is 
needed. With proper precautions in design and software, it is possible to use Serial Port A 
as both a programming port and as a user-defined serial port, although this will not be nec-
essary in most cases.

Rabbit Semiconductor supports the use of the standard programming port and the standard 
programming cable as a diagnostic and setup port to diagnosis problems or set up systems 
in the field.

Rabbit Semiconductor provides a standard BIOS for the Rabbit. The BIOS is a software 
program that manages startup and shutdown, and provides basic services for software run-
ning on the Rabbit.

Dynamic C is Z-World’s interactive C language development system. Dynamic C runs on 
a PC under Windows 32-bit operating systems. Dynamic C provides a combined compiler, 
editor, and debugger. The usual method for debugging a target system based on the Rabbit 
is to implement the 10-pin programming connector that connects to the PC serial port via a 
standard converter cable. Dynamic C libraries contain highly perfected software to control 
the Rabbit. These includes drivers, utility and math routines and the debugging BIOS for 
Dynamic C.

In addition, the internationally known real-time operating system, uC/OS-II, has been 
ported to the Rabbit, and is available with Dynamic C on a license-free, royalty-free basis 
for use in Rabbit-based products..