Jasco 99000 ユーザーズマニュアル

4

1)  Turn on the power to the computer you plan to stream 
 audio 

from.

2)  Move the switch on the GE 99000 to the A/V setting PRIOR to
  plugging it into your computer’s USB port.
3)  Plug the GE 99000 into an open USB port on your computer.
  Your computer will begin to install the necessary windows
  drivers to support this GE 99000 USB Transmitter.
4)  Wait until this process is completed. This could take up to 2
  minutes for your computer to confi gure the device. During this
  time the GE 99000 blue LED will be fl ashing rapidly.
5)  Turn on the Bluetooth

®

 receiver that you wish to transmit 

  audio to. This could be a pair of Bluetooth

®

 enabled stereo 

  headphones or other Bluetooth

®

 receiving device.

6) The Bluetooth

®

 receiver should automatically pair with the GE 

  99000 within 2 minutes. When the devices are discovered you 
  will see the BLUE LED on the GE 99000 start to blink twice and 
  then it will change to blink slow and steady once the devices 
 are 

paired.

7)  Start the media player or music player on your Bluetooth

®

 

 enabled 

computer.

8)  Select and play the music you want to listen to. You should now 
  hear the music transmitted from your computer VIA Bluetooth

®

 

  wireless technology. You should not hear any music coming 
  from your computer speakers.

Note: It may take up to two minutes to pair the GE 99000 to 
a receiver for the fi rst time. It will be quicker in searching on 
successive attempts. During pairing, the status LED indicator on 
the GE 99000 will fl ash quickly. When complete, the LED indicator 
will fl ash slowly and steadily.