MURO METAL PRO CH7260 ユーザーズマニュアル

Ver: 10/14/2004                                                        4 

 

1)  Move the feed lever over slightly, and then press on the end of the feed latch as in 

photo 3. 

2)    Move the feed lever back so it no longer centers the fastener as in Photo 4 and 

release the feed latch.  This frees the screw from the feed latch. 

3)  Then, pull the strip towards you and then out of the tool as shown in Photo 5.  This 

action will push over the strip tensioner spring to allow the strip to be removed easily. 

 

 

 
It should be noted that 
fasteners with large 
heads 

might not 

directly latch into the 
screw guide easily.   If 
this happens, push the 
feed lever over with 
your finger while 
inserting the strip of 
screws to latch the 
first screw before 
using. 
 

3
1 

2