Multiquip Appliance Trim Kit MVH-304DSB ユーザーズマニュアル

See Tables 8 (engine) and 9 (plate compactor) on proceeding
pages for engine and plate compactor troubleshooting guide.

1.

Check the battery terminals periodically to ensure
that they are in good condition.

2.

Use wire brush or sand paper to clean the battery
terminals.

3.

Check battery for cracks or any other damage. If white
pattern  appears inside the battery or paste has
accumulated at the bottom, replace the battery.

4..

If the machine will not be in operation for a long
period of time, store in cool dry place and check the
battery charge level every month to maintain the
performance of the battery.

1.

Take off the battery cover by removing the M6 nuts (Figure 25).

2.

When removing cable, disconnect the ground side (normally
negative) first (Figure 25).

3.

When installing cable connect the ground side (normally
negative) last.

Wear 

safety glasses or  face mask,

protective clothes, and rubber gloves when
working with battery.