Multi-Tech Systems MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 ユーザーズマニュアル
Chapter 4: Configuring your MVPGSM
Multi-Tech Systems, Inc.
MVPGSM
42
The SMTP Parameters dialog box has a secondary dialog box, accessed by the Select Fields button, that allows
you to customize email logging. The MultiVOIP GSM software logs data about many aspects of the call traffic
going through the MultiVOIP GSM. The Custom Fields screen lets you pick which aspects will be included in the
email log reports.
you to customize email logging. The MultiVOIP GSM software logs data about many aspects of the call traffic
going through the MultiVOIP GSM. The Custom Fields screen lets you pick which aspects will be included in the
email log reports.
“Custom Fields” Definitions
Field
Description
Field
Description
Select All
Log report to
include all fields shown.
include all fields shown.
Start Date,
Time
Time
Date and time the phone call began.
Channel
Number
Number
Channel carrying call.
Call Mode
Voice or fax.
Duration
Length of call.
Packets
Received
Received
Total packets received in call.
Packets Sent Total packets sent in call.
Bytes
Received
Received
Total bytes received in call.
Bytes Sent
Total bytes sent in call.
Coder
Voice Coder /Compression Rate used
for call will be listed in log.
for call will be listed in log.
Packets Lost
Packets lost in call.
Prefix
Matched
Matched
When selected, the phonebook prefix
matched in processing the call will be
listed in log.
matched in processing the call will be
listed in log.
Outbound
Digits
Received
Digits
Received
The DTMF dialing digits received by this
gateway from the remote gateway
presuming that DTMF is set to "Out of
Band."
gateway from the remote gateway
presuming that DTMF is set to "Out of
Band."
Call Type
Indicates the Call Signaling protocol
used for the call.
used for the call.
Call Status
Successful or unsuccessful.
DTMF
Capability
Capability
Indicates whether the DTMF dialing
digits are carried "Inband" or "Out of
Band." It can display either "Out of
Band RFC2833" or "Out of Band SIP
INFO" to indicate the out-of-band
condition or "Inband" to indicate the
in-band condition.
digits are carried "Inband" or "Out of
Band." It can display either "Out of
Band RFC2833" or "Out of Band SIP
INFO" to indicate the out-of-band
condition or "Inband" to indicate the
in-band condition.
Call Direction Indicates originating party.
Server
Details
Server
Details
The IP address of the traffic control
server (if any) being used will be
displayed here if the call is handled
through that server.
server (if any) being used will be
displayed here if the call is handled
through that server.
Disconnect
Reason
Reason
Indicates whether the call was
disconnected simply because the
desired conversation was done or
some other irregular cause occasioned
disconnection (e.g., a technical error or
failure). Values are "Normal" and
"Local" disconnection.
disconnected simply because the
desired conversation was done or
some other irregular cause occasioned
disconnection (e.g., a technical error or
failure). Values are "Normal" and
"Local" disconnection.
Outbound
Digits Sent
Digits Sent
The dialing digits sent by this gateway
to the remote gateway presuming
that DTMF is set to "Out of Band."
to the remote gateway presuming
that DTMF is set to "Out of Band."
From Details
To Details
Gateway
Name
Name
Originating gateway
Gateway
Name
Name
Completing or answering gateway
IP Address
IP address where call originated.
IP Address
IP address where call was completed
or answered.
or answered.
Description
Identifier of site where call originated.
Description
Identifier of site where call was
completed or answered.
completed or answered.
Options
When selected, log will record Silence
Compression and Forward Error
Correction by call originator.
Compression and Forward Error
Correction by call originator.
Options
When selected, log will record Silence
Compression and Forward Error
Correction by party answering call.
Compression and Forward Error
Correction by party answering call.