Multi-Tech Systems MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 ユーザーズマニュアル
Chapter 4: Configuring your MVPGSM
Multi-Tech Systems, Inc.
MVPGSM
46
If you enable console messages, you can customize the types of messages to be included/excluded in log reports
by clicking on the Filters button and using the Console Messages Filter Settings screen. If you use the logging
function, select the logging option that applies to your VOIP system design. If you intend to use a SysLog Server
program for logging, click in that Enable check box. The common SysLog logical port number is 514. If you
intend to use the MultiVOIP GSM web browser interface for configuration and control of MultiVOIP GSM units,
be aware that the web browser interface does not support logs directly. However, when the web browser
interface is used, log files can still be sent to the administrator via email (which requires using SMTP logging).
by clicking on the Filters button and using the Console Messages Filter Settings screen. If you use the logging
function, select the logging option that applies to your VOIP system design. If you intend to use a SysLog Server
program for logging, click in that Enable check box. The common SysLog logical port number is 514. If you
intend to use the MultiVOIP GSM web browser interface for configuration and control of MultiVOIP GSM units,
be aware that the web browser interface does not support logs directly. However, when the web browser
interface is used, log files can still be sent to the administrator via email (which requires using SMTP logging).
“Logs” Screen Definitions
Field Name
Values
Description
Enable Console
Messages
Messages
Y/N
Allows MultiVOIP GSM debugging messages to be read via a basic terminal program
like HyperTerminal ™ or equivalent. Normally, this should be disabled because it
uses MultiVOIP GSM processing resources. Console messages are meant for IT
support personnel.
like HyperTerminal ™ or equivalent. Normally, this should be disabled because it
uses MultiVOIP GSM processing resources. Console messages are meant for IT
support personnel.
Filters (button)
Click to access secondary screen on where console messages can be
included/excluded by category and on a per-channel basis.
included/excluded by category and on a per-channel basis.
Turn Off Logs
Y/N
Check to disable log-reporting function.
Logs Buttons
Only one of these log reporting methods, GUI or SMTP, may be chosen.
GUI
• User must view logs at the MultiVOIP GSM configuration program.
SMTP
• Log messages will be sent to user-specified email address.
SysLog Server
Enable
Enable
Y/N
This box must be checked if logging is to be done in conjunction with a SysLog Server
program.
program.
IP Address
n.n.n.n IP address of computer, in VOIP network, on which SysLog Server program is running.
Port
514
Logical port for SysLog Server. 514 is commonly used.
Online Statistics
Updation
Interval
Updation
Interval
integer Set the interval (in seconds) at which logging information will be updated.