Motorola Stud Sensor 3.1 ユーザーズマニュアル

8 

 – Communications have been restored 

for a sensor device that is currently configured in the network 
that was formerly unreachable. 

 

The Activity Window displays message information, such as date and time, direction, sequence 
#, message size, and message data (text & hex) for the selected sensor. 

 

 

 

Data Style 

Using the radio buttons on the Data Style panel directly below the 
Activity Window, data to be transmitted to a sensor can be formatted 
to be relayed either As Text or As Hex.  Text (character based), Hex,  
or a combination of Text and Hexidecimal messages can be sent to a 
sensor node. 

Message 

The data string to be transmitted to a sensor is entered in the 
Message

 field.  The actual transfer of the data is initialized by clicking 

on the Send button. 

GPIO 

The General Purpose I/O (GPIO) pin can be configured for input, 
output, or transmit enable (RS-485 applications only) via 
MeshManager. The GPIO radio buttons for Off,  On, and Don’t 
Change

.  The Insert button is used to insert unprintable characters 

into a normal test message.  See Appendix A for the ASCII character 
set. 

 

As depicted at the bottom left of Figure 10, multiple Sensor Activity windows can be displayed 
simultaneously. Each window displayed will be identified by displaying a unique MAC address 
on the window tab for easy identification.