Motorola Router 6161252-00-01 ユーザーズマニュアル

Select Config File Name and enter the name of the file you will download. The name of the file is available 
from the site where the ser ver is located. You may need to enter a file path along with the file name (for 
example, bigroot/config/myfile).

Select GET CONFIG FROM SERVER and press Return. You will see the following dialog box:

Select CANCEL to exit without downloading the file, or select CONTINUE to download the file. The system 
will reset at the end of the file transfer to put the new configuration into effect.

If you choose to download the configuration file, the TFTP Transfer State item will change from Idle to 
Reading Config. The TFTP Current Transfer Bytes item will reflect the number of bytes transferred.

Using TFTP, you can send a file containing a snapshot of the gateway’s current configuration to a TFTP ser ver. 
The file can then be downloaded by a different Router unit to configure its parameters (see 

or just for creating configuration backup files.

Uploading a file can also be useful for troubleshooting purposes. The uploaded configuration file can be tested 
on a different Router unit by Motorola or your network administrator.

To upload a configuration file, follow these steps:

1.

Select TFTP Server Name and enter the ser ver name or IP address of the TFTP ser ver you will use. The 
ser ver name or IP address is available from the site where the ser ver is located.

2.

Select Config File Name and enter a name for the file you will upload. The file will appear with the name you 
choose on the TFTP ser ver. You may need to enter a file path along with the file name (for example, 
Mypc/Netopia/myfile).

3.

Select SEND CONFIG TO SERVER and press Return. Motorola will begin to transfer the file.

4.

The TFTP Transfer State item will change from Idle to Writing Config. The TFTP Current Transfer Bytes 
item will reflect the number of bytes transferred.

You can restar t the system by selecting the Restart System item in the Utilities & Diagnostics screen. 

You must restar t the system whenever you reconfigure the Router and want the new parameter values to take 
effect. Under cer tain circumstances, restar ting the system may also clear up system or network malfunctions. 
Some configuration processes automatically restar t the system to apply the changes you have made.

    +----------------------------------------------------------------------+
    +----------------------------------------------------------------------+
    | Are you sure you want to send a saved configuration to your Netopia? |
    |                                                                      |
    |                                                                      |
    |               CANCEL                         CONTINUE                |
    |                                                                      |
    +----------------------------------------------------------------------+