Motorola 2.1 ユーザーズマニュアル
Chapter 2: Network Setup
• auth_server_shared_secret=
<Radius
server shared secret> - must match the
shared secret configured in your RADIUS server. (In our reference design this
is
is
mesh
)
•
r0k_server_port=<R0k server port> - default 2121 (In our reference design this
is kept as
is kept as
2121
)
•
r0k_client_port=<R0k client port> - default 4000 (In our reference design this is
kept as
kept as
4000
)
•
interface=<interface name> - default eth0 (In our reference design this is kept
as
as
eth0
) e.g., eth0, eth1…etc.
•
r0k_md_id= <mobility domain ID in ASCII - 6 bytes> IMPORTANT - must be the
ASCII translation of the HEX entered in the One Point Manager™ application.
(For example if 123456 was entered in the WM application you must enter
ASCII translation of the HEX entered in the One Point Manager™ application.
(For example if 123456 was entered in the WM application you must enter
313233343536
)
• r0k_id= <R0 key holder ID in ASCII - 16 bytes> IMPORTANT - must be the
ASCII translation of the HEX entered in the One Point Manager™ application.
(For example if 1122334455667788 was entered in the WM application you
must enter
(For example if 1122334455667788 was entered in the WM application you
must enter
31313232333334343535363637373838
)
To run the r0kd daemon first navigate to the directory which was chosen when the Linux
environment script was executed. (In our reference design the r0kd daemon was installed in
/opt/r0kd/.
environment script was executed. (In our reference design the r0kd daemon was installed in
/opt/r0kd/.
To run the r0kd daemon as a background processes type the following at the command
prompt:
prompt:
/opt/r0kd/r0kd -B /etc/r0k.conf
2-33