Motorola MICOM-2ES/2RS/2TS ALE ユーザーズマニュアル

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

 

To help you add new station addresses to the ALE directory of your radio set in a 
controlled manner, MICOM-2 has a special ALE address filter. To enable this filter, 
enable the Auto Address function on the 

PROG>ALE>OPT>AADR 

menu (this 

function can also be enabled by means of the RSS). 
When enabled, the address filter compares the source address of each call received 
by your radio set with the addresses stored in the ALE directory. When the first new 
unlisted address is found, it is stored in a special memory stack, and you are notified 
that at least one unlisted address has been detected by adding the option 

 (F2) 

under 

, after the 

option. When you want to check the addresses 

stored in the stack, you select 

 (F2) and then decide whether to erase an address 

or add it to the ALE directory of your radio set.  
Up to 20 new addresses can be stored in this stack, which is organized as a FIFO 
stack: this means that when a new address, different from all the previously detected 
addresses, is received while 20 addresses are already stored, it will replace the oldest 
address.  
The information on the received addresses is automatically erased when the radio is 
turned off; only addresses added to the directory remain in the directory. 
➤ 

1. Press 

 (F1) and select 

 (F2) 

2.  When addresses are stored in the new received 

addresses stack, you will see the 

 (F2) option. 

Press 

 (F2) to display the RCV screen. 

RCV

5061

ADD   ERAS  SAVE  

AMDs

 

3.  You will see RCV screen. The screen displays the 

last detected unlisted address. Use the 

 

arrows to display the desired address (the display is 
cyclical). 

ALE

PROGRAMMING

NET   RCV   DIR   AMDs

 

4.  When the desired address is displayed, press the key corresponding to the 

action to be performed: 

•  To delete the address from the stack, press 

 (F2). 

•  To add the address to the directory, press 

ADD

 (F1). The address is 

removed from the stack 

5.  To confirm, press 

 (F4). 

6.  Repeat the actions until all the desired addresses are 

processed. When done, press 

 to end. 

 

If the stack is now empty, the

 (F2) option is no longer displayed on the ALE 

menu.  

62 

_________________________________________________________________________________________________