Mobi Technologies 70061 ユーザーズマニュアル

Use the Power ON/OFF sliding switch to turn ON/OFF the unit (see 

#21 on page 3). 

Press the Channel Selection Switch (fig. 17) on the Camera to 

choose which channel you want the unit to transmit on. The chan-

nel indicator LED (fig. 16) will illuminate which channel the Camera 

is set to (A or B). Make sure to set the additional camera to a differ-

ent channel than the first camera. For instance, if the fist Camera is 

set to Channel A, then the additional should be set to Channel B.

 

To Activate: Select the VOX setting on the Function Activation 

Switch (18)on the left side of the Camera unit. When the sound level 

within the area surrounding the unit reaches a preset level, the 

Camera will begin transmitting the image and sound to the Monitor.

NOTE: The LCD on the Monitor unit will automatically switch to 

standby mode if no signal is received from the Camera. To Deacti-

vate: Select the CAMERA setting on the Function Activation Switch 

of your camera.

The infra-red night vision feature will switch on automatically 

during darkness or periods of very low levels of light and a black 

and white image will be displayed on the monitor. Once the feature 

is activated objects must be within 6 ft/ 2 m of the camera to be 

seen on the monitor.

7 

 

 

 

 

 

 

 

 

 

 

4