Mintek HD-52Z585 ユーザーズマニュアル

Please follow the flow chart below to determine which connection setup is right for you. Then, 
refer to the appropriate diagrams to connect your television to other devices that you may 
have. After you are finished connecting your devices, plug the power cord into the nearest 
power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the 
television does not work properly, contact your local cable operator.
•   To connect a DVD player, see Diagram #3. A DVD player is optional.
•  If you have a satellite television system, please refer to the satellite TV manual.

Do you use a Cable TV Box?

Do you have a VCR?

Do you have a VCR?

Turn the television on and off by pressing the P

OWER

 button at the top right corner 

of the remote. The POWER LED will light blue.  If this is the first time you are 
turning on the TV, the interactive  plug-in menu appears.
•   Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if 

you need to operate a cable box.

•    Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to 

DVD to control a DVD player. Please see pages 25 to 28 for instructions on 
programming your remote control to operate a cable box, VCR or DVD player.