Microtek DLP CX6 ユーザーズマニュアル

–  iii  – 

The remote control has a laser for pointing out items on a screen.  
DANGER: Do not point the laser in the eyes. Doing so can damage the eyes permanently. 

Ø  Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in 

the unit. For servicing, contact qualified service personnel. 

Ø  Follow all warnings and cautions in this manual and on the unit case.  

Ø  The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the 

lens when the lamp is on.  

Ø  Do not place the unit on an unstable surface, cart, or stand. 

Ø  Avoid using the system near water, in direct sunlight, or near a heating device.  

Ø  Do not place heavy objects such as books or bags on the unit. 

Ø  Only use the supplied power cord. 

Ø  Do not place anything on the power cord. Place the power cord where it will not be in the way of 

foot traffic. 

Ø  Remove the batteries from the remote control when storing or not in use for a prolonged period. 

Ø  Replacing the lamp can be hazardous if done incorrectly. Refer to “Replacing the Projection Lamp” 

on page  2 7 for clear and safe instructions for this procedure. 

Ø  Unplug the power cord. 

Ø  Allow the lamp sufficient time to cool. 

Ø  Unplug the power cord before cleaning. Refer to “Cleaning the Projector” on page  29. 

Ø  Allow the lamp sufficient time to cool. 

Ø  Before installing and using the projector, read the regulatory notices in the “Regulatory Compli-

ance” section on page 4 0. 

This manual  is intended for end users and describes how to install and operate the DLP projector. Wher-
ever possible, relevant information —such as an illustration and its description — has been kept on one 
page. This printer- friendly format is both for your convenience  and to help save paper and thereby protect 
the environment. It is suggested that you only print sections that are relevant to your needs.