Microboards Technology CD Disc-to-Disc Office Copier II ユーザーズマニュアル

    

                                                                        Orbit II Disc-to-Disc Copier Reference Manual – Revision I

 

 

21 

 
Unloading Masters: 
 
When the Input Hopper is empty, Orbit II will alert you by sounding the Buzzer, and scrolling an Input 
Hopper Empty message on the Display.   
 

•  If your job is not completed, load the appropriate number of discs into the Input Hopper, and press 

the    Yes   key to continue your job. 

 

•  If your job is done, press the      No     key again.  Orbit II will open the Reader Tray so you can 

unload your master.   

 

•  If you are not going to do another job, unload your master and gently push the Reader tray inward 

until it powers itself closed. 

 

•  If you are going to start a different job, replace the master in the Reader tray, insert the desired 

quantity of discs in the Input Hopper, select the desired Orbit II operation, and press the      Yes   
key again to close the Reader tray and start the new job. 

 
 
 
We suggest you keep the master disc on top of your stack of copies.  This will identify the stack of  
discs, and keep your master available for compare operations or quality assurance tests.