Micron Technology Transport LT ユーザーズマニュアル

ページ / 170
Using the Hard Drive
Introducing Your TransPort LT
40
Although Windows 98 can work with FAT-16 or FAT-32 (a 32-bit file allocation 
table), your computer has been supplied with FAT-32. Older software that you 
may have (16-bit software) may require FAT-16 to run. Similarly, Windows NT 4.0 
can use FAT-16 or NTFS (the Windows NT file system). There are utilities 
included with Windows 98 and Windows 2000 to convert from FAT-16 to FAT-32 
or NTFS (Windows NT 4.0 and Windows 2000), see the documentation included 
with your Operating System for more information. 
The MRestore disk includes Partition Magic that also allows you to convert 
partitions. For more information, see “MRestore CD-ROM” on page 99.
C
AUTION
:
It is not possible to convert from FAT-32 or NTFS to FAT-16 without 
reformatting your hard drive.
Removing the Hard Drive
C
AUTION
:
To prevent loss of data and damage to the disk, do not remove the hard 
drive while the computer’s power is on and do not drop or jar the hard drive.
To remove the hard drive from the computer:
1. If you are installing a new hard drive, backup the application and data files on 
the old hard drive before removing it from the computer. 
2. Turn the computer off. 
3. Close the LCD panel, and turn the computer over so that the bottom of the unit 
faces up.
4. Remove the screw that holds the hard drive in place (Figure 15).
Figure 15. Removing the Hard Drive
Hard-drive 
Bottom of 
computer