Meridian Audio Digital Surround Controller G61 ユーザーズマニュアル

C a l i b r a t i n g  

t h e   s y s t e m

3 2

 Setting  up   sources

This section explains how to use the  Sine/Sub/Sens controls to 

adjust the sensitivity of the analogue sources.

To obtain the best signal-to-noise ratio for each analogue source 

you can adjust its sensitivity to give the highest level that does not 

produce clipping.

• Select the source you want to adjust, with loud source material 

playing.

• Display  the  Sine/Sub/Sens controls as described above.

• Press  Sens- or Sens+ to decrease or increase the sensitivity.

The display shows the current sensitivity and the peak level; for 

example:

Sine -Xover+

-Sens.+

TV    1.4V  Peak -3

You can adjust the sensitivity between 0.7, 1.0, 1.4, 2.0, and 2.8V 

(least sensitive).

If the sensitivity is set too high the input will clip the loudest 

passages, and the peak will be 0dB.

The display shows, for example:

Sine -Xover+

-Sens.+

TV    2.0V  Clip -0

In this case reduce the sensitivity by selecting a higher number.

If you have selected a digital source you cannot adjust the 

sensitivity and the display shows, for example:

Sine -Xover+

-Sens.+

DVD   Not Analogue