Melissa Double Cooking Plates 750-024 ユーザーズマニュアル

- 

Make sure that the cooking plate is completely dry before use.

- 

The cooking plate should not be placed on a untreated woodsurface. Place
the cooking plate on a heat resistant surface.

- 

Before using for the first time, the protective coating must be burned off the
hotplates. Ensure the room is well ventilated while doing this, as it may  give
off an unpleasant smell. This is normal and will disappear after a couple of
minutes.

1.

Large cooking plate

2. Indicator 

light

3.  Heat level selector

4.  Small cooking plate

5. Indicator 

light

6.  Heat level selector

The cooking plates are controlled by a thermostat.  This means that the power
will be switched on and off from time to time.  Consequently, the thermostat
lamps will also be switched on and off from time to time. 

Pls. note that when the cooking plates are switched on for the beginning of a
cooking process the thermostat will switch on and off during this heat up process
until final max. set temperature is reached. 

In case the unit is used in e.g. a cottage or summerhouse where the ambient
temperature is low during the winter season the thermostat can switch on the unit
by itself.  So, since there is no on/off switch on the unit ALWAYS UNPLUG THE
UNIT AFTER EACH USE.

- 

Plug in the appliance and turn the socket on.

- 

Choose the desired heat setting.

- 

The indicator light will go on and off when the thermostat switch on and off.

-

Always use flat-bottomed saucepans which make good contact with the hot
plate.

3

1

2

3

4

5

6

ES-020_IM  27/05/04  11:26  Side 3