Mellerware 35400 ユーザーズマニュアル

•  Remove the packing and make sure that the appliance 

is intact. In case of doubt do not use the appliance 
and contact our after-sales service. Do not leave 
packaging materials like bags and staples within 
reach of children.

•  Before switching on appliance check if the electrical 

voltage and frequency of the circuit correspond to 
those indicated on the appliance.

•  The appliance has to be connected to a circuit 

according to the rules in force concerning the civil 
plant. The plant has to be related to the nominal 
power of the appliance and has to be provided with an 
earth-wire.

•  Use the appliance only for the mentioned purpose, 

namely as a radiator for domestic use. Do not use it 
for any other application as it could get dangerous.

•  The supplier is not responsible for any eventual 

damages caused by improper or faulty use.

•  Never touch the appliance with wet or damp hands or 

feet.

•  Never expose the appliance to atmospheric conditions 

(rain, sun, etc.).

•  The appliance must be always placed on a flat and 

stable surface.

•  Switch the appliance off and unplug it before cleaning.
•  When the appliance is not in use switch it off and 

unplug it. Make harmless the parts of the appliance 
which could be handled hazardously by children for 
playing.

•  Do not use the radiator near bath-tubs, showers, 

wash-basins or swimming pools (minimum distance 1 
meter).

•  Do not put the cable on the appliance when it is still 

warm.

•  A correct operation of the appliance is obtained when 

the radiator is installed vertically. Do not switch on the 
fan heater near pieces of furniture, curtains, shelves, 
etc.

•  Do not use the appliance near liquids or flammable 

matters.

•  Never operate the appliance immediately below an 

outlet.

•  ATTENTION: Do not connect the appliance to a 

device switching the appliance automatically on 
such as a thermal control device or a time switch to 
avoid overheating risks when the radiator is moved or 
covered.

•  Do not cover the appliance when it is running to avoid 

overheating risks.

•  In case the power cord is damaged send it to the 

nearest after sale service recommended by the 
supplier for the replacement.

•  Children, old people and disabled people are not 

often aware of the dangers, which can derive from 
improper use of the appliance. The appliance should 
never be used without an adult supervision.

•  Do not connect the appliance to extension cords or 

multiple outlets.

•  Do not damage and do not kink the power cord.
•  Before cleaning the appliance or carrying out any 

maintenance switch off the whole system.

•  If the appliance is out of work switch it off without 

tampering it. If any repair is required please contact 
only the after-sale centres approved by the supplier 
and ask for original spare parts. Otherwise safety of 
the appliance can be compromised.

Assemble the body frame and the base plate together as 
the following sequences:
1.  Remove the butterfly nuts from the lower part of the 

body frame.

2.  Insert the power cord through the slot placed in the 

middle part of the basement and then assemble the 
body frame to the base plate.

3.  Secure the body frame to the base plate by means of 

the two butterfly nuts previously removed. Insert the 
power cord through the suitable slots and then fix it by 
the clamp.

•  Plug in the appliance. Check that the outlet has at 

least a 10 AMPERE current carrying capacity.

•  Select the power by suitable switches. Press the 

oscillating switch TURN to make the radiator oscillate. 
Press it again to switch off the oscillating movement of 
the appliance.

•  The radiator can be activated manually by pressing 

the handle situated in the rear part of the appliance.

•  This appliance is provided with two safety devices: 

the first device disconnects the appliance when the 
radiator is tilted or when is tipped by means of a 
switch situated in the lower part of the radiator. The 
second safety device disconnects the appliance in 
case of overheating by means of a thermo fuse.

•  The appliance needs only an external regular 

cleaning.

•  After use and before cleaning always unplug the 

appliance and wait till the item is cool.

•  Clean the grilles from dust.
•  Do not clean the painted parts with emery flour or 

solvents and use only a moistened cloth.