Marantz SR4200 ユーザーズマニュアル

11

Select the output level of the LFE signal included in the Dolby Digital
signal or the DTS signal. Select 0dB, -10 dB or OFF with    or 
button.
The level is ordinarily set to 0 dB. When use DTS Music source, LFE
level is set to -10 dB.

Four digital inputs can be assigned for the desired source.
Use this menu to determine which source is connected to which input.

When the digital output of a DVD player is connected to Digital 4 (input
jack) of the SR4200;

Select “DIG IN” with cursor buttons   or 

and press the 

 or 

button.

Select “DIGITAL4” with cursor buttons   or 

and press the 

 or

  button.

Select “D4/DVD” with cursor buttons   or 

and press the 

 or 

button.

If you desire to continue the next setup, press the   and   or 

  button.

If you desire to exit from menu system, press the 

 button.

The TUNER is assigned to the analog input, and are prevented
from selecting any digital input.
While the DTS-LD or DTS-CD is playing, this setup is not available,
this is to avoid noise being generated from the analog input. Stop
the LD or CD playback to setup.
The SR4200 does not switch from digital input to analog input or
vice versa automatically.
In the event that both digital and analog inputs are connected to
SR4200, if you desire to switch to an analog input temporarily, you
can switch by pressing the 

 button 

y

.

When you press the 

 

¤1

, the test tone will be cycled through in

a circular pattern which is FL (front left) 

→

 C (center) 

→

 FR (front right)

→

 RS (right surround ) 

→

 LS (left surround) 

→

 SW (subwoofer) 

→

 FL

→

 ... 3 seconds for each channel.

Adjust the level of test tone for each channel with the   or   buttons of
the RC5200SR