Marantz PM6005 ユーザーズマニュアル

40

2 Supported audio formats

32/44.1/48/64/88.2/96/176.4/192 kHz

16/24 bit

%

• When a digital sound signal that has a sampling frequency that is not 

supported by this unit is input, the input indicator (COAXIAL or OPTICAL) 

flashes in the display. 

• Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise 

and could damage the speakers.

• If the sampling frequency switches, such as from A mode to B mode in a CS 

broadcast, muting may operate for 1 – 2 seconds, cutting the sound.

This is a function to prevent damage to devices within the power supply 

when an abnormality such as an overload, excess voltage occurs or over 

temperature for any reason.

If a malfunction occurs in this unit, the power indicator blinks red and the 

unit switches to standby mode.

Sampling involves taking a reading of a sound wave (analog signal) at 

regular intervals and expressing the height of the wave at each reading in 

digitized format (producing a digital signal).

The number of readings taken in one second is called the “sampling 

frequency”. The larger the value, the closer the reproduced sound is to 

the original.

Playback with higher fidelity to the source becomes possible, as input 

audio signals are output by bypassing the audio quality-control circuits 

(BASS/TREBLE/BALANCE).

This is an AC resistance value, indicated in Ω (ohms). Greater power can 

be obtained when this value is smaller.